10000L SS Pilot Scale Fermenter

10000L SS Pilot Scale Fermenter

Laboratory Fermenter Manufacturer

We Manufacture Laboratory Fermenter For  Biotech Laboratory and Pilot Scale Production. Our Laboratory Fermenter Comes With Two Types As Per Sterilization Method. As Per Sterilization We Differentiate Laboratory Fermenter Bioreactor To Our Customers.

  1. Autoclavable Laboratory Fermenter
  2. Insitu Serializable Laboratory Fermenter

Advantages Of Insitu Sterilizable Fermenter Is That , The Body Of Laboratory Fermenter This Type Is Made Of SS 316 or SS304 Material. Because Of Stainless Steel Body Higher Pressure Up to 4 Kg/cm2 Can Be Taken In Fermenter. Insitu Sterilizable System Is Very Easy To Operate Without Open any Connection In Fermenter. Benefit Is Of Insitu Fermenter Is That, Inplace Sterilization Can Occur  Manufacturer of Laboratory Fermenter 

Laboratory Fermenter Manufacturer

Laboratory Fermenter Manufacturer and Supplier

 

Total Volume 10000L
Working Volume 70% Of Total Volume
Contact Part SS 316L
Non Contact Part SS304
Sheet Thickness 4 mm
Inner Finish Mirror Finish
Outer Finish Matt Finish
Motor 15 HP
RPM 144
Speed Control Using VFD(Variable Frequency Drive)
Design Temperature 130 Degree Celcius
Temperature Sensor PT-100
Design Temperature 121 Degree Celcius
Max. Operating Temperature 121 Degree Celcius
Design Pressure 6 kg/cm2
Max. Operating Pressure Of Jacket 4 kg/cm2
Max. Operating Pressure Of Vessel 1.2 kg/cm2
Safety Valve Adjustable Spring Operated
Pressure Indicator Analog Type
Air Outlet 0.2 Micron PP Filter With 5” SS 316L Filter Housing
Air Inlet 0.2 Micron PP Filter With 5” SS 316L Filter Housing
Air Outlet Through Through Shell Tube Type Condenser ( Heat Exchanger)
Sparger System Ring Type Air Spurger System At Bottom
Sealing Mechseal/ Stuffing Box
Baffle 4 Nos( Size Vessel Dia/10)
Impeller 3 Nos Of Adjustable Ruston Turbine( Six Blade)
Bottom End Dish End With 50 mm Tc Drain Valve For Material Outlet
Sight Glass Toughen Glass
Top Glass Toughen Glass
Top Light Glass Toughen Glass

 

since we’re only going to use one opening of the three-way addition port.  we want to close off the other two the easiest way to do that let’s take a piece of tubing and connect it to two of them.  so that they are now closed off and won’t allow anything from the room to get in there. now for the last position on the three-way port right there. we’re going to connect our feed bottle that’s going to adjust the pH. that’s going to on the third spot.  and we can just secure it with that cable tie which is already on it. now we still have one opening we have the harvest tube opening you remember that’s like a straw.

lab bioreactor Manufacturer

lab bioreactor manufacturer

 

× How can I help you?